Bo Hu 
- (2012): Evaluation of Cracks in a Spliced, Prestressed Concrete I-Girder Bridge. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2313, n. 1 (January 2012).
- (2023): Discrete sizing optimization method based on dividing rectangles algorithm and local response surface for steel frame structures. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Research on section dimension optimization of high-rise steel–concrete composite buildings based on improved dividing rectangle algorithm and combined response surface model. In: Structures, v. 58 (December 2023).
- (2023): Residual Deformation-Based Performance Evaluation Method for CFST Piers Subjected to Vehicle Collision. In: Journal of Performance of Constructed Facilities (ASCE), v. 37, n. 2 (April 2023).
- (2023): Analytical investigation into the flexural behavior of steel tubular truss-and-concrete (STTC) composite beams. In: Structures, v. 50 (April 2023).
- (2022): Experimental study and modification of the constitutive model of superelastic SMA considering multi-factor effects. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): A structured grid generation framework based on parameterization for the design of free-form gridshells. In: Journal of Building Engineering, v. 62 (December 2022).
- (2021): Dynamic splitting tensile bond behavior of new-to-old concrete interfaces. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Experimental and numerical study on the performance of new prefabricated connections for free-form grid structures. In: Structures, v. 36 (February 2022).
- (2021): Aerodynamic Instability of Stay Cables with Lighting Fixtures. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (May 2021).
- (2017): Improved Design Limit for Antiram Bollard Systems Subjected to Truck Impact. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 11 (November 2017).
- (2020): Electrocoagulation of Dairy Manure Using Low-Carbon Steel Electrodes for Phosphorus Removal. In: Journal of Environmental Engineering (ASCE), v. 146, n. 6 (June 2020).
- (2016): Mathematical Model for Sediment Wash-Off from Urban Impervious Surfaces. In: Journal of Environmental Engineering (ASCE), v. 142, n. 4 (April 2016).
- (2013): Theoretical and experimental study on load-carrying capacity of combined members consisted of inner and sleeved tubes. In: Structural Engineering and Mechanics, v. 45, n. 1 (January 2013).
- (2020): Bond behavior of hybrid FRP-to-steel joints. In: Composite Structures, v. 237 (April 2020).
- (2020): The coupled effect of temperature, humidity, and air movement on human thermal response in hot–humid and hot–arid climates in summer in China. In: Building and Environment, v. 177 (June 2020).
- (2019): Can co-production be state-led? Policy pilots in four Chinese cities. In: Environment and Urbanization, v. 31, n. 1 (April 2019).
- (2020): Dynamic slant shear bond behavior between new and old concrete. In: Construction and Building Materials, v. 238 (March 2020).
- (2019): Comparative Study of Ultimate Bond Strength Models for FRP-to-Steel Bonded Joints. In: International Journal of Steel Structures, v. 19, n. 6 ( 2019).
- (2012): Evaluation of Cracks of Hathaway Precast Concrete Segmental Box Girder Bridge. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2019): Experimental study on seismic behavior of reinforced concrete frame in primary and middle schools with different strengthening methods. In: Construction and Building Materials, v. 217 (August 2019).
- (2019): Seismic Performance of Interior and Exterior Beam–Column Joints in Recycled Aggregate Concrete Frames. In: Journal of Structural Engineering (ASCE), v. 145, n. 3 (March 2019).
- (2011): Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading. In: Construction and Building Materials, v. 25, n. 5 (May 2011).
- (2016): Orthogonal analysis and optimization of a K4-rating auto-lifting anti-ram bollard system. In: International Journal of Steel Structures, v. 16, n. 2 ( 2016).
- (2013): An improved criterion for sufficiently/insufficiently FRP-confined concrete derived from ultimate axial stress. In: Engineering Structures, v. 46 (January 2013).
- (2015): Evaluation of Cracks in a Large Single-Cell Precast Concrete Segmental Box Girder Bridge without Internal Struts. In: Journal of Bridge Engineering (ASCE), v. 20, n. 8 (August 2015).
- (2007): Bio-Based Composite Roof for Residential Construction. In: Journal of Architectural Engineering (ASCE), v. 13, n. 3 (September 2007).
- (2016): Maximum Impact Force of Truck Frontal Crashing into Antiram Bollard Systems. In: Journal of Structural Engineering (ASCE), v. 142, n. 12 (December 2016).
- (2017): assessment of current maximum impact force models for anti-ram bollard systems subjected to truck impact. In: International Journal of Protective Structures, v. 8, n. 3 (September 2017).
- (2018): Degradation of Out-of-plane Initial Stiffness of Steel-concrete Walls Exposed to Fire. In: International Journal of Steel Structures, v. 18, n. 1 ( 2018).
Structurae cooperates with
