General Information
Project Type
| Structure: |
Deck arch bridge Barge |
|---|---|
| Support conditions: |
for registered users |
| Function / usage: |
Tramway, light or metro rail bridge Road bridge |
| Material: |
Steel bridge Structurae Plus/Pro - Subscribe Now! |
| Plan view: |
Structurae Plus/Pro - Subscribe Now! |
Location
| Location: |
Berlin-Tiergarten, Mitte, Berlin, Germany Berlin-Mitte, Mitte, Berlin, Germany |
|---|---|
| Crosses: |
|
| Coordinates: | 52° 31' 19" N 13° 22' 34" E |
Technical Information
Dimensions
| main span | 44 m | |
| total length | 75.22 m | |
| clearance | 7.5 m | |
| bridge surface | 1 790 m² | |
| deck | deck width | 23.40 m |
Cost
| cost of construction | German Mark 34 000 000 |
Materials
| deck |
steel
|
|---|
Excerpt from Wikipedia
The Crown Prince Bridge (German: Kronprinzenbrücke) is a road bridge over the River Spree in the city of Berlin. It links the Berlin quarters of Mitte and Tiergarten with the parliamentary quarter within the borough of Bezirk Mitte. The structure carries Konrad-Adenauer-Straße – the continuation of Reinhardtstraße – which has two vehicle lanes as well as cycleways and footpaths on both carriageways. Immediately on the western end of the bridge is the children's nursery of the German Bundestag and the Spreebogenpark.
History
Ist predecessor was a wooden bascule bridge built in 1709 below the Schönhauser Graben stream and known as the Unterbaum Bridge. In 1828 it was moved upstream and modified. From 1877 to 1879 a new bridge was built on the western Kronprinzenufer bank, and was named after the then German crown prince, Frederick William. The structure was a cast iron, timber framed, arch bridge with three arches and a width of 22 metres. The centre arch had an opening of 18.68 metres wide, the two outer arches were each 15.48 metres wide. The piers and abutments were made of clinker bricks, clad with granite in places, the foundations were of concrete.
At the end of the Second World War the Crown Prince Bridge was badly damaged and, after 1945, was provisionally maintained. With the construction of the Berlin Wall in 1961 the bridge was closed and lost ist importance as a transport route because the River Spree was a sector boundary here. In 1972, it was torn down by East German officials to avoid refugees travelling from East Germany to the West. The piers and abutments were left in place.
Present bridge
More than 20 years later, the bridge was rebuilt as a symbol of peace and the reunification of Germany.
Its design was based on a submission by the winner of a contest, and then was developed into a full project. Ist main engineer, Gerhard Sedlacek, is the designer of the revolutionary support system holding it up on either side of the river (the elbows are visible nearest to the water). This was necessary to avoid having piers which would have hampered navigation.
Text imported from Wikipedia article "Crown Prince Bridge" and modified on 10 May 2023 according to the CC-BY-SA 3.0 license.
Participants
Relevant Web Sites
Relevant Publications
- (1996): Besonderheiten der Fertigung und Einschwimm-Montage des Stahlüberbaus der Kronprinzenbrücke in Berlin. In: Stahlbau, v. 65, n. 10 (October 1996), pp. 368-376.
- (2001): Bruchmechanischer Festigkeitsnachweis für die Stahlgußelemente der Kronprinzenbrücke in Berlin. In: Stahlbau, v. 70, n. 4 (April 2001), pp. 251-257.
- (1996): Calatrava Bridges. Birkhäuser, Basel (Switzerland), pp. 150-159.
- (1996): Realisierungswettbewerb Wiederaufbau Kronprinzenbrücke. In: Stahlbau, v. 65, n. 12 (December 1996), pp. 522-530.
- ÜberBrücken. Neue Verbindungen in der Hauptstadt. Senatsverwaltung für Stadtentwicklung, Berlin (Germany), pp. 34-35.
- About this
data sheet - Structure-ID
20000442 - Published on:
22/10/1999 - Last updated on:
05/06/2023
Structurae cooperates with
